Comments

• If I plug in a 10Gb module into the SFP+ port will I be able to use for the Pri WAN and be able to get 2Gb+?

  in I have a client looking to swap their SonicWall Tz firewall Comment by Ron_DDC March 27
• I set up as instructed and opened a ping to the printer and still getting a request timed out :(

  in Tz570 cannot ping devices Comment by Ron_DDC March 2023
• I see about the Deny rule but I cant figure out how to open up all devices on a zone called M_Wif to LAN and ip address of 192.168.168.10 The Source is x3 and the LAN is on x0 In other words I have devices 192.168.50.x on x3 on a zone that I called M_WIF and I have a printer 192.168.20.20 on the LAN zone. I want to allow…

  in Tz570 cannot ping devices Comment by Ron_DDC March 2023
• Also, can you point me in the correct direction for how to create ACL rules and NAT rules?

  in Tz570 cannot ping devices Comment by Ron_DDC March 2023
• what is the service for the allow rule? Will this also allow the computers on the 25 subnet to ping their gateway 25.1?

  in Tz570 cannot ping devices Comment by Ron_DDC March 2023
• I understand that but I do have access rules and objects assigned to that interface/zone. As you see in the attachments the zone is set to public and I have been having issues that I think re-assigning it to trusted would benefit the move.

  in Trying to change a Zone from Public to trusted Comment by Ron_DDC February 2023
• I want to be able to ping from a device in the DMZ to a device in the DMZ not from the DMZ to the LAN and visa versa

  in WIFI Access Points in the DMZ Zone for LAN protection Comment by Ron_DDC January 2023
• There is only one and that is a deny ANY ANY . Why would that make a diff if we want to be able to ping a device on the WIFI/DMZ to another device on the WIFI/DMZ? Also the WIFI printer card is on the WIFI/DMZ

  in WIFI Access Points in the DMZ Zone for LAN protection Comment by Ron_DDC January 2023